Metal Treatment Chemicals

Spray Phosphating

Product Details:
  • Physical State: Liquid

We offer both Zinc & Iron Phosphating Spray chemicals ,

ZINPOFOR ZS Gives light, smooth, dense, crystalline zinc phosphate coating, firmly adherent to, and integral with the surface being treated. The build up of the coating is around: 100 to 400 mg/s.ft. the treated surface is ideal for liquid painting and powder coating.

In SPRAY process: Used at 2% concentration. Spray duration 90 to 180 seconds.

Used at room temperature and can be heated up to 60 deg Centigrade.

VANGUARD ISP


Removes thin films of oil

· Forms a light amorphous iron phosphate coating on ferrous and steel components.

· Forms zinc phosphate coating on galvanized steel surfaces by converting a part of the zinc surface into an integral zinc phosphate coating.

· Forms aluminium phosphate coating on aluminium surfaces. The phosphate coatings so formed will be a good base for subsequent liquid painting and powder coating.

· May be used as 3-stage, or 5-stage, depending upon type and degree of oils and superficial impurities.

· By spray process

· In spray process, dwell time is 60 to 120 seconds.

· Build-up of iron phosphate coating: 50 to 60 mg./sq.ft.

· Build-up of zinc phosphate coating on galvanized steel surfaces will be around 50 -150 mg/sq.ft.

· Build-up of aluminium phosphate coating: 50 to 100 mg./sq.ft.

 

Aluminium Chromating

Product Details:
  • Physical State: Liquid
  • Usage: Industrial

ALUGOLD chromating chemical is designed to treat aluminium, and its alloys

ALUGOLD gives yellow chromate coating, giving low coating weight and higher conductivity; the corrosion resistance is very good, and provides a good adhesion base for paint film, whether it is powder coating or liquid painting.

ALUGOLD is used as a 3% solution;

Functioning at Room Temperature (25oC)

Dip duration: 3 to 5 minutes.

 

Aluminum Brightener

Product Details:
  • Physical State: Liquid

Albrite

{ Acid based aluminium brightener }

Albrite is an extremely strong mixture of acid solution for tough fleet cleaning jobs of aluminum! It is ideal to use as part of a two-step process. Leaves aluminum with a soft satin sheen, too.

Albrite is also highly effective in cleaning stainless steel. Aluminium Cleaner removes corrosion products and oxide films with minimal attack on the substrate and reduced localised pitting.

Non Chrome Coating On Aluminium

Product Details:
  • Types of Metal: Heavy Metal
  • Types of Metal Coating: Galvanizing

 

Even though the process of chromating is a proven one, it is generally preferred to have a chrome free treatment, to reduce the severe pollution hazards caused by chrome. We offer ALUCOAT NC, Chrome-free ZINC-ZIRCONIUM phosphating for aluminium surfaces.

 

ALUCOAT NC is a chrome-free treatment for Aluminium. It gives zinc-zirconium phosphate coating

As base on Aluminium surfaces for subsequent liquid paint or powder coatings,

· Is made up as a 5% solution;

· Functioning at Room Temperature (25oC)

· Dip duration: 5 to 10 minutes.

· Build up of coating: 2 to 4 g/m2.

 

As base for subsequent drawing of aluminium components.

· Is made up as a 7 to 10% solution;

· Functioning in the Optimum Temperature range of 50 to 55oC.

· Dip duration: 5 to 10 minutes.

Build up of coating: 5 to 7.5 g/m2.

 

Metal Finishing Chemicals

Product Details:
  • Physical State: Liquid
  • Usage: Industrial

Finishing Chemicals

Product Details:
  • Packaging Size: GALLON

Stain Removers

Product Details:
  • Application: Fabrics, Tiles
  • Form: Liquid
  • Packaging Type: Pouch
  • Types: Oxidising Type

Looking for Metal Treatment Chemicals ?
Share Us:
© Guardian Anti Corrosives Pvt. Ltd.
Desktop Site Back to top