Degreasers

Hot Alkaline Degreaser

Product Details:
  • Physical State: Liquid
  • Usage: Industrial

Thelnikal HD is formulated to remove heavy coatings of oil, etc., normally encountered in fabrication of steel sheets.

Thelnikal HD bath chemical functions as a 5% solution, at optimum operating temperature range of 75 ± 5 Deg C.

Duration of dip: Normally about 20 minutes. But, the duration of dip will depend upon the type and degree of superficial contamination on the components. The user industry will know the duration after working a few workloads. The bath chemical should be agitated for satisfactory and quick degreasing.

Room Temperature Alkaline Degreaser

Product Details:
  • Physical State: Granules

Thelnikal LD is specially formulated to effectively remove thin oil, grease etc. Which are not of the drying type from both ferrous & non ferrous surfaces.

Thelnikal LD removes thin wet films which are not of the drying type; the oil film may have accumulated superficial dust and soils, which have settled on the surface in storage.

Bath chemical functions as a 5% solution, in the optimum temperature range of room temperature (20 deg. C) to 60 deg c.

Spray Degreaser

Product Details:
  • Physical State: Liquid
  • Usage: Industrial

THELNIKAL-SP is specially formulated to effectively remove thin oil, grease and other superficial impurities etc. which are not of the drying type from ferrous surfaces by spraying.

PARAMETER FOR SPRAY PROCESS: Concentration 20 Kgs. of chemical dissolved in water for every 1000 litre bath working volume. Dwell time 120 to 180 seconds. It works between Room Temperature to 55 deg C.

Emulsion Degreaser

Product Details:
  • Packaging Type: Can
  • Physical State: Liquid

Used for removing adamantly adhearing oil, greasy matter, dried/cooked oils etc. Can be used for degreasing both ferrous and non ferrous components.

Alkaline Degreasers

Product Details:
  • Packaging Type: Bottle, Can

We have a range of Alkaline Degreasers to degrease ferrous and non ferrous components, both by dip and spray process. THELNIKAL range of degreasers are capable of degreasing from room temperature to elevated temperature.

Aluminium Degreasers

Product Details:
  • Physical State: Granules
  • Usage: Industrial

Aluminium a soft metal has to be degreased properly. Strong alkalis will etch the surface and care shouls be taken to avoid it.

THELNIKAL LD

The starting point of metal finishing is metal cleaning. Metal cleaning is the removal of undesirable soils and oils. Soil assumes many forms: machining, forming, grinding, stamping, drawing, and buffing etc. All leave behind residues superficial impurities. Oils, grease, soaps, protective oils also contaminate the surfaces

 

THELNIKAL LD à removes thin wet films which are not of the drying type; the oil film may have accumulated superficial dust and soils, which have settled on the surface in storage.

 

Bath chemical functions as a 5% solution, in the optimum temperature range of room temperature (20+ deg. C) to 60 deg. C.
ALUCLEAN BC

( Versatile Acidic Cleaner for Aluminium Beverage Cans )


ALUCLEAN BC is specially formulated acidic cleaner to clean Aluminium Beverage cans. More importantly it is chromium free. It is used with the addition of ALUCLEAN FL and the combination is well formed to clean aluminium cans in conventional power spray processing equipment.

 

ALUCLEAN BC cleaner effectively removes drawing lubricants and compounds and maintains the original brightness on the surface of the cans.

 

ALUCLEAN BC process is sludgeless.

ALUCLEAN SP

( Versatile Alkaline Cleaner for Aluminium surfaces by spraying )


ALUCLEAN SP is specially formulated alkaline cleaner for cleaning and degreasing of aluminium surfaces in automotive, architectural and household usages.

 

After cleaning with ALUCLEAN SP it can be taken for any further treatments.

BATH PREPARATION:

1. Fill the tank to the operating level with fresh cool water.

2. For every 100 litres of operating tank volume, Add 1- 3 litres of ALUCLEAN SP .

3. Heat the bath to the required temperature which is recommended anywhere between 50 - 80 deg C.

4. Then the spray can be done.

5. The Duration of spray depends upon the impurities and the soiling and varies from 1 to 10 minutes

After cleaning with ALUCLEAN SP the surface should be thoroughly rinsed with clean running water.

Solvent Degreaser

Product Details:
  • Physical State: Liquid
  • Usage: Industrial


KLEENSOLV is a specially formulated solvent for multi-purpose industrial and maintenance cleaning. It replaces TCE and other carcinogenic chlorinated solvents. The product is used as a cleaning treatment to remove most greases, oils, lubrication fluids, metal cuttings and fines from all surfaces.

 

KLEENSOLV evaporates with no residue. It is suitable for use in electrical and communications maintenance as a replacement for 1,1,1-trichloroethane.

 

KLEENSOLV is suitable for many types of cleaning and degreasing. It can be used as a wipe or immersion bath.

 

KLEENSOLV is effective at room temperature. Cleaning time and effectiveness will vary based on the contaminant.

KLEENSOLV contains no surfactants and leaves no residue once dried.

KLEENSOLV is flammableand all safety precautions must be taken while handling and storing it.

KLEENSOLV   is   BIODEGRADABLE   AND   NON CARCINOGIC.

Degreaser & Cleaner

Product Details:
  • Packaging Type: Bottle

Thelnikal AB

 

Room temperature degreaser & cleaner in liquid form

 

Bath parameters:

 

Bath solution

made up by mixing 10-15 litres thelnikal-ab per 100 litres working volume

Optimum operating temperature

room temperature (20+ deg. C) to 50 deg. C

Duration of dip

normally about 5 to 10 minutes. Duration of dip depends upon the type and degree of superficial contamination on the components.

If applied by brush

make sure that every area is covered for the chemical to react

 

Equipment:

 

The tank for thelnikal-ab may be fabricated out of mild steel, the tank may also be fabricated out of stainless steel 316. Dimension of the tanks depend upon the dimensions and contour of the components to be processed. The heaters should be made of ss 316 preferably.

 

 

Bath make-up:

 

  1. Fill up the tank with water to about half of the intended working volume.
  2. Calculate how many litres of thelnikal-ab will be needed to make up the bath solution at the rate of 10-15 litres of thelnikal-ab for every 100 litres working volume; get the required volume of the chemical.
  3. Add thelnikal-ab to the water, slowly, and keep stirring the water in the tank to ensure proper mixing.
  4. Finally, after the entire quantity of thelnikal-ab chemical has mixed in the water, add more water to bring the bath solution to working level.
  5. The bath chemical may now be used at room temperature, or heated upto 50 deg. C.

 

 After the bath has been in use for some time, some of the impurities which were removed from the components will float in the tank. Skim off the floating oil frequently, so that it will not stick to the component while it is being removed from the tank after degreasing. An oil skimmer may be provided for this purpose. The bath may be used by filtering frequently: say, once in three months.

 

 

Cleaner For Oxygen Services

Product Details:
  • Packaging Type: Bottle

Bioclean O2

(A Bio-degradable cleaner degreaser for oxygen services)

 

 

Unlike petroleum-based solvents, aqueous cleaners such as Bioclean solutions that are typically non-flammable and contain little or no Volatile Organic Compounds (VOCs), which damage the atmosphere. Although they clean differently, aqueous cleaners perform as well as solvents. The product is designed to clean through brush at ambient and heated temperatures. But cleaning can be enhanced through spraying.

 

Bioclean O2is bio-degradable.

 

Bioclean O2is non flammable.

 

BIOCLEAN O2does not attack any metal plastics.

 

BIOCLEAN O2does not contain caustic, ketones, or other toxic substances.

 

Bioclean O2can be used at Room Temperature (20 Deg C). It can be heated upto 50 deg C for faster and better results.

 

Bioclean O2comes in liquid form and can be mixed with water according to the area of application and the amount and type of contaminants that is to be removed.

 

Normally it is diluted as 4 parts of water to 1 part of Bioclean O2

 

If used by dip method, an air agitation will enhance the performance of the Bioclean O2 A spray process will give excellent results.

 

Bioclean O2is bio degradable and provides an excellent work environment and does not pollute the air.

Looking for Degreasers ?
© Guardian Anti Corrosives Pvt. Ltd.
Desktop Site Back to top