Industrial Cleaners

Engine Cleaner

Product Details:
  • Packaging Type: Bottle

Guardclean-ECis a superb engine cleaner that quickly removes the dirt, and, grime from auto, marine and other engines.


Guardclean-ECclean the system fast easy and safely without harming any part. It does not is harm under-hood rubber, and plastic when used as direct.


Usage Instructions:


Cover all parts that you have to protect like, carburetor throat, electronic components, gadgets, etc.


Spray the Guardclean-ECgenerously, dirtiest parts first. Avoid over spraying on to the external car finish. Leave the Guardclean-ECto soak into dirt and grime for about 5-10 minutes.


Some areas may require you to use detailing brushes to get the grime off. Always use soft bristled brushes and never use brass or stainless steel ones. Those will scratch plastic and paint and really take away from the look of your engine. Wash off thoroughly with a strong stream of water.


Remove the covers and start engine and idle for few minutes to assure complete drying.


Guardclean EC can also be used by dipping the engine in the cleaner. The duration of dip depends on the amount of impurities that is to be removed.


DISPOSAL:Use and dispose of product, container, residue etc in accordance with all local laws and regulations.

Radiator Cleaner

Product Details:
  • Use: Industrial

Guardclean -RC is a powerful cleaner for radiator, to remove the dirt, grease, scale, grime & solder from the engine cooling system without damage to any part.

Guardclean -RC not only clean the clogs of the system but also keep the system in order to run for a longer period.


Guardclean -RC clean the system fast easy and safely without harming any part.   it is particularly inhibited to make it harmless to copper, aluminum and other special alloys that  is normally employed in the cooling systems.



usage instructions:


always bring the engine and cooling system to reach the ambient temperature and then remove the radiator cap.   drain the cooling system. Refill with water and start engine and flush with hose until the drain water runs clear.   stop engine. Close the drains.


now add 350-500 ml of guardclean -rc, with required water to fill the radiator and replace the radiator cap.   start engine and run at fast idle. Continue for 20-30 minutes.   drain the cooling system. Because of the unique blend of acids and cleaners in guardclean -rc, no neutralizer is needed. Simply flush the system with a generous supply of water until water runs clear.



disposal:  use and dispose of product, container, residue etc in accordance with all local laws and regulations.  


Adhesive Remover

Product Details:
  • Physical State: Liquid
  • Usage: Industrial, Personal

The rising demand of our products is our new achievement due to our good quality product day by day the demand of our product is increased. Now we are offering Adhesive Remover to the customers. The product is made under the strict supervision of our team. They made products with latest technology by using their high skills of profession. We use qualitative material of the well known vendor of the industry.




  • Cost effective
  • Fine results
  • Longer shelf life

Epoxy Remover

Product Details:
  • Packaging Type: Bottle
  • Physical State: Liquid

Graffiti Remover

Product Details:
  • Brand: Any

GUARDCLEAN ( Graffiti Remover )

Oven & Grill Cleaner

Guard Grill

{Formulation for Oven & Grill Cleaner}


Guard Grill is a heavy duty cleaner for periodic maintenance in areas of

heavy grease build-up like, ovens and grills, in food premises.


Guard Grill is a highly alkaline detergent formulation suitable for periodic cleaning of heavily soiled ovens, grills etc. This specially formulated blend of alkali, surfactants and solvents removes even heavily carbonized soil. When diluted with water, Guard Grill is also suitable for soak cleaning of fryers.


To clean Ovens / grills:


1. First make sure that the temperature of  the surface to be cleaned is  less than 80 deg C.

2. Spray Guard Grill  directly on to the surface or equipment that is to be cleaned.

3. Leave for 5 - 30 minutes depending upon the level of soiling.

4. Remove loose deposit with a brush.

5. Rinse well with clean, hot water and allow to air dry.


To clean the Fryer


1. Drain oil and close valve

2. Fill half of it with water.

3. Add 500 ml of Guard Grill  for every 10L of water . Then fill water fully.

4. Turn on fryer and bring to a controlled boil for 15-30 minutes.

5. Then cool it down and drain the contents. Scrub remaining residues from side walls and heating elements with a brush.

6. Rinse twice with clean, hot water and allow to air dry.



To clean Grill extractor:



1. Dismantle the grill extractor.

2. Immerse them in a vessel which carries hot water which is mixed with Guard Grill   in the proportion of 100 ml per lt of water.

3. Allow it for 15 - 60 minutes.

4. Rinse well with clean water and allow to air dry



Note:  DO NOT use on alkali sensitive materials such as aluminum and copper.


General Information:


1.     Its in liquid form.

2.     Slight amber color and clear

3.     Has characteristic odour

4.     Not combustible

5.     Density 1.05 – 1.15

6.     Completely soluble in water

7.     pH will be 12

Dish Washer Detergent

Product Details:
  • Pack Type: Packet

Guard wash

Alkaline dish washing detergent


Guard wash is a highly concentrqted alkaline liquid detergentexclusively formulated for automatic machine washing of cutlery, dishes , glasses, pots and pans. This heavy duty alkaline special formulation removes food particles and all kinds of stains formed by the food and leaves a clean shine. It is non perfumed and ecologically very safe.

Using procedure:

GUARDWASH is dispensed directly from the container intothe machine. Recommended normal dilution is 3-5 ml per lt of water. Depending upon the type of food the dilution varies.


Physical data:

Appearance - Clear liquid, colourless

pH - 12 - 13


Packing: 25/50 LTS


Precaution: guardwash should not be mixed with acid products. It should not be used on aluminium surfaces.

Bactericidal Hand Dishwash Detergent

Product Details:
  • Pack Size: Medium


Bactericidal hand dishwash detergent


Ideal is a specially formulated Hand dishwashing detergent for general cleaning of crockery, pots, pans and utensils.


Ideal is

• pH neutral

• Contains effective bactericidal

• Helps prevent cross infection


Physical data:

Appearance - Clear viscous liquid

Colour - Pale yellow

Foam - None

Odour - Detergent

pH - 7 - 8


Method of use:

One ml of IDEAL per lt of water is the normal dilution for not only the Crockery & Kitchen Utensils but also for general cleaning. Warm water will give better results.

Piston Cleaner

Product Details:
  • Form: Metal

Guardclean - PCspecially developed to remove burnt-on carbon deposit in the piston rings.


Guardclean - PCis a safe, effective, and economical water-based cleaner engineered to remove baked-on carbon, oils, greases and other soils from pistons, tracked vehicles, trucks and automotive engine parts.


Guardclean - PCis recommended for soak tanks, cabinet washers, ultra sonics, and through-put machines.


Guardclean – pccontains a safe blend of detergents, wetting agents, sequestering agents, penetrates, rust and corrosion inhibitors

Usage instructions:

Simply soak the piston/parts in guardclean – pc, ( mixed with water as 1:1) for 2 to 24 hours to remove even the nastiest build-up. After the parts are cleaned remove them from the solution. agitation of the bath and heating it up to say, 60 deg c reduces the soak time, but is not necessary.

Salient features:

  • Multi-metal safe
  • Non-flammable
  • No voc
  • Biodegradable
  • Non-toxic
  • No hazardous ingredients

disposal:use and dispose of product, container, residue etc in accordance with all local laws and regulations.

Cement & Concrete Floor Cleaner

Product Details:
  • Packaging Type: Bottle


(Heavy Duty Cement & Concrete Floor Cleaner)


  • C & C KLEENER the floor cleaner which works with most power floor scrubber from hand machines to the large ride-on floor cleaning machines
  • C & C KLEENER cuts through greasy fuel and oil residues and atmospheric soiling without using the harsh acids, caustics and solvents common to many other industrial degreasers
  • C & C KLEENER is perfect for prepping greasy, grimy floors in warehouses, manufacturing plants, machine shops and other industrial sites and improve floors appearance
  • C & C KLEENER designed to be fast and easy to mix, dries virtually residue free & leave a healthy, clean shine after cleaning
  • C & C KLEENER gives low foam for use with any mechanical cleaning device
  • C & C KLEENER contains readily biodegradable ingredients
  • C & C KLEENER is nonflammable and water soluble

Application Instructions:


  • Remove loose debris and heavy buildups
  • Apply diluted C & C KLEENER liberally. ( dilution depends upon the surface impurities and varies from 1 to 4 parts to 10 parts of water). While spraying, do not atomize
  • Let solution dwell for few minutes. (the dwell time depends on the amount of impurities)
  • Water rinse thoroughly to remove all residues. Pressure rinsing improves cleaning efficiency

Industrial Cleaner/Degreaser

Product Details:
  • Packaging Type: Bottle

SMS–DG [ BIODEGRADABLE General Purpose Degreaser ]

SMS–DG is a specially designed liquid to degrease both ferrous and non ferrous metals.


SMS–DG is suitable for immersion, spray and manual applications.


SMS–DG is bio-degradable, Non flammable, Non-Abrasive, Non-Corrosive and Non-toxic.

SMS–DG does not contain caustic, acid, ketones, Chlorinated Hydrocarbons, or other toxic substances.

SMS–DG is used at Room Temperature. If needed it can also be used at elevated temperatures say up to 60 °C.

SMS–DG does not harm painted surfaces, natural rubber, electric wiring insulation, leather, carpet, silicon rubber, neoprene or polypropylene.

SMS–DG is a perfect cleaner to use in ultrasonic tanks & for high pressure and steam cleaning applications.

SMS–DG is highly concentrated and can be used at various dilution ratios based on the amount of contamination and the method of use.



Additional Information:
  • Item Code: DEGREASER

N Propyl Bromide Based Precision Solvent Cleaner

Product Details:
  • Packaging Type: Bottle
  • Physical State: Liquid


{ n-Propyl Bromide based solvent }


KLEENSOLV is a specially formulated solvent for multi-purpose industrial and maintenance cleaning. It replaces TCE and other carcinogenic chlorinated solvents.


KLEENSOLV a Precision Cleaning Solvent, is a powerful but environmentally friendly cleaner degreaser that is non-toxic, non-flammable, non-corrosive, non-ozone depleting, and non-regulated.

KLEENSOLV is have virtually zero non-volatile residue content making them an ideal solvent for critical wipe, flush, immersion, precision vapor degreasing and ultrasonic cleaning applications..

KLEENSOLV is highly effective at cleaning organic contaminants such as oils, greases, lubricants, coolants, drawing fluids, adhesives, waxes, fluxes and flux residues. It is formulated to be compatible with all metals and a broad range of elastomers and plastics..

KLEENSOLV is effective at room temperature. Cleaning time and effectiveness will vary based on the contaminant.

KLEENSOLV contains no surfactants and leaves no residue once dried.

KLEENSOLV is non flammable.





Additional Information:
  • Item Code: KLEENSOLV
Looking for Industrial Cleaners ?
Share Us:
© Guardian Anti Corrosives Pvt. Ltd.
Desktop Site Back to top